AC blowing warm air after a refrigerant refill usually means the underlying fault wasn’t fixed or the charge isn’t correct. The most common cause is an active leak that let the new refrigerant escape, but airflow or metering problems can also stop heat from being removed. Other issues include overcharge, non‑condensables (air or moisture) in the lines, a stuck expansion valve, weak compressor, or a condenser fan that isn’t moving heat outside. A quick temperature split check at the vents plus superheat/subcool readings will confirm what’s happening. I often find a system can look “full” on a gauge yet still blow warm if the TXV is stuck closed. Teams serving the Nashville area see this most often after spring startups.
If you notice these, schedule a diagnostic:
- Refrigerant leak not repaired or mixed refrigerant
- Charge set by guesswork instead of weighed‑in specs
- Blocked condenser coil or failed outdoor fan
- Stuck TXV or faulty reversing valve on heat pumps
Turn the system off if the outdoor unit isn’t running or you see ice, and book a professional check to prevent compressor damage.
Updated: 2026-07-03
Need help in Nashville, IN? Call 317-830-5862 or book online.